Graphite gasket sheets

Statotherm P foil  9591/P Statotherm P foil
9591/P
Statotherm P foil 9591/P gasket sheet material consits of flexible graphite (purity >99.85 % with low ash content). The soft and flexible material can compensate uneven surfaces. It is a basic gasket material without measurable cold- or warm flow. Therefore Statotherm P foil 9591/P is applicable for all branches of industry as the gasket material for valves and pumps, for emergency service and special applications.
Equates to SGL Sigraflex foil.
Statotherm 1P 9593/1P Statotherm 1P 9593/1P Statotherm 1P 9593/1P is a graphite based gasket sheet made from flexible graphite (purity > 98 %) bonded to smooth stainless steel foil (316 L; 0.05 mm thickness). It is a gasket sheet material with a highly adaptive graphite layer allowing its use at low surface pressures or with weak flanges.
Statotherm 5P 9593/5P Statotherm 5P 9593/5P Impregnated graphite sheet with tanged metal reinforcement. Universal gasket material for all branches of industry. Used as seal for valves and pumps, for weak flanges, exhaust pipes etc., as gaskets according to DIN 2690 for flanges with flat face; for enamel and glass surfaces, especially for inspection holes; for emergency service and sophisticated Forms.
Under the recommended surface pressures, no cold- or warm flow is measurable; graphite is not ageing and doesn't become brittle, due to the absence of binders; good resistance to chemicals;
Can be applied from lowest temperatures up to over 500 °C; soft, flexible; very good performance with temperature cycling; high stability under pressure.
Statotherm S6P 9593/S6P Statotherm S6P 9593/S6P Statotherm S6P 9593/S6P is a gasket sheet made of flexible graphite (purity >98,0%), with stainless steel tanged metal reinforcement (316 L, 0.1 mm thickness). This gasket material shows its great properties especially in pipe flanges, hand holes, pump flanges, valves and ball valves in all branches of industry.
Statotherm HDP 9593/HDP Statotherm HDP 9593/HDP Statotherm HDP 9593/HDP is a reinforced, multi-layer gasket sheet made of 0.5 mm thick layers of high grade, impregnated graphite foils (purity >99.85 %) manufactured without adhesive with 0.05 mm thick stainless steel foils (AISI 316 L). This gasket is an ideal solution for applications with high flange pressures and high operating pressures. The gasket is used for applications with a high demand for operating safety and leak tightness (60 N/mm²).
Equates to SGL Sigraflex Hochdruck.
Statotherm HDPPro  9593/HDPPro Statotherm HDPPro
9593/HDPPro
Statotherm HDPPro 9593/HDPPro is a reinforced, multi-layer gasket sheet made of 0.5 mm thick layers of high grade, impregnated graphite foils (purity >99.8 %) manufactured without adhesive with stainless steel foils. For better handling reduction of leakage the gasket is impregnated.
Equates to SGL Sigraflex Hochdruck Pro.
Statotherm SSTC 9592/MP Statotherm SSTC 9592/MP Statotherm SSTC 9592/MP is a reinforced gasket sheet made of impregnated graphite (purity >99 %) with adhesive-free inlay of expanded metal (1.4404, AISI 316 L).
Equates to Frenzelit Novaphit SSTC.
Statotherm  
SSTC-TAL 9592/P Statotherm
SSTC-TAL 9592/P
Statotherm SSTC-TAL 9592/P is a high quality gasket sheet made of expanded graphite and a silicon free layer of expanded metal, without any binder or filler. The sealing material - expanded graphite (>99 % graduated density) with an acid-resistant expanded metal inlay of chromium nickel steel (1.4404) - forms a three dimensional structure when under load. This material is universally applicable in all sectors of industry and maintenance engineering.
Equates to Frenzelit Novaphit SSTC-TA-L.